Product Description

DC10 is a multi-output power supply for effect pedals based on a toroidal transformer. It has 10 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it’s a perfect solution for bigger rigs with DC pedals only.

The three powerful sections with 400mA each will power pedals with special requirements like Strymons, Eventides, TC Electronic Nova-series pedals or TC Helicon pedals, Moogerfoogers, Radial Tonebone pedals or others without the need of special cables. Selectable with a switch DC10 offers voltages 9, 12 and 15V, and combined with the included Stack Flex or Series adapter Flex also 18 and 24V. The first 4 isolated outlets offering 4x100mA are perfect for standard 9V low current pedals.

Features

10 outlets configured in 8 isolated sections
Toroidal transformer with additional electromagnetic field shielding
3 powerful DC sections with 400mA each
15V option for Radial Tonebone pedals
Short circuit protection of all outlets
Advanced LED monitoring of each section
Temperature monitoring
120 or 230V mains voltage operation
A total of 16 Flex cables included
Split Flex for powering two pedals of one outlet included
Stack Flex and Series adapter Flex for powering 18 or 24V pedals included
Compatible with Pedaltrain and Temple Audio pedalboards
Mounting bracket and all pedalboard mounting hardware included

Specifications

Outlet 1-4: 9V DC / 100mA each
Outlet 5-6: 9 or 12V DC / 200mA each*
Outlet 7-8: 9 and 12V DC / 400mA
Outlet 9-10: 9 and 12 or 15V DC / 400mA
Size: 158x98x35mm (excl. detachable rubber feet)
Weight: 1,1kg
Warranty period: 5 years worldwide

* can be merged into a 400mA section

What's in the box

CIOKS DC10 power supply
Mains power cord
16 Flex cables:
Type 1 – black with 5,5/2,1mm centre negative DC plug x8
Type 2 – red with 5,5/2,1mm centre positive DC plug x1
Type 4 – green with 5,5/2,5mm centre positive DC plug x2
Type 5 – black with 3,5mm tip positive Jack plug x1
Type 6 – black with 9V battery clip x1
Split Flex type 1 – black, powers two pedals of a single outlet x1
Stack Flex type 1 – white/black, adds voltages of two outlets x1
Series Adapter Flex – white, adds voltages of two outlets x1
Pedalboard mounting hardware: mounting bracket, screws, washers, stand-off and hex key
Manual
Product sheet (drill guide)
Flex guide