Stratocaster Pickguard, 11 Hole, HSS, 4 Ply, Vintage Tortoise

Product Description

These should be a good fit on MOST genuine Fender® MIA and MIM Stratocasters® made after 2002. We say "most" because there are quite literally thousands of little variations in screw hole patterns and shapes between all the different model variations over the years, so there is always a chance some screw holes won't line up perfectly with yours. If your guitar is built before 2002, or if it is a similarly shaped guitar from an alternative brand, it may not fit at all. Please see the provided dimensional drawing to determine whether or not this is the right pickguard for your needs prior to purchasing.

Specifications

• 11-hole (pickup height screw holes and selector screw holes are NOT countersunk)
• Routed for HSS (bridge bumbucker and 2 single coil pickups) with 3 pot holes and one blade switch.
• Routed for standard 6-hole or 2-point tremolos. Will NOT fit with Floyd or similar sized locking trems.

Please note: Pickguards may come with 2 layers of protective plastic. If you remove one, and notice a number of frayed edges and other odd blemishes in the material, there is likely a second layer of plastic to be removed.

- Next Gen Guitars