Positive Grid Spark Pedal Portable Smart Amp & Effects Pedal, w/Built-In Looper

YOUR RIG. ONE PEDAL. ZERO COMPROMISE.

Spark PEDAL puts an entire gig-ready rig, a smart effects processor, and a looper in a single, hassle-free setup. No menus. No complex routing. Just legendary tone, anywhere you plug in. The rig follows you now.

ANY RIG. ANY SETUP.
Plugs into everything. PA, pedalboard, laptop, headphones & more.

BUILT-IN 60-SECOND LOOPER.
Record, overdub, undo. Hands-free.

UP TO 7-HOUR RECHARGEABLE BATTERY.
Plays through rehearsal, the gig, and after.

33 AMPS. 43 EFFECTS. 100,000+ TONES.
Powered by the same HD Tone Engine in Spark 2.

ONE PEDAL. EVERY SITUATION.

Spark PEDAL is built around one idea: your tone shouldn't be tied to one room or one rig.

Direct to PA
Show up, plug in, and rip. Two ¼″ line outputs send a full, cabinet-emulated stereo signal straight to the front-of-house desk. Soundcheck in seconds.

Headphones
⅛″ stereo headphone output. Full amp and effects at any hour, with zero noise.

Desktop recording
Plug in over USB-C and your DAW sees Spark PEDAL as an audio interface. Studio-quality sound, direct to your session.

Pedalboard
Drop Spark PEDAL into your existing board and add a full amp and effects rig to the setup you already play.

Jam along to anything
Pair your mobile device over Bluetooth and jam along to your own playlists, backing tracks, and favorite songs.

Into your amp
Already have an amp you love? Keep it. Switch off the cab sim and use Spark PEDAL as a dedicated effects processor in front of your existing rig. 43 effects, your amp, your tone.

On the road
Up to 7 hours on a rechargeable battery. Practice. Warm up. Record. It's all here.

GREAT TONE. NO SETUP REQUIRED.

Powered by Spark’s HD Tone Engine. This isn’t just modeling — it’s a living, breathing ecosystem. The exact same high-definition DSP architecture as Spark 2, the world’s best-selling practice amp. All dialed in for electric, acoustic, and bass guitars.

Spark LINK sold separately.

DUAL-MODE CONTROLS. INSTANT FLEXIBILITY.

Spark PEDAL gives you deep control without the complexity. Five multifunction knobs and three heavy-duty footswitches adapt instantly between amp and effects control.

AMP MODE - Dial in your Gain, Bass, Mid, and Treble in real time — exactly like a traditional amp head.

FX MODE - Click the main knob to instantly transform those same knobs into a dedicated stompbox row, controlling Drive, Modulation, Delay, and Reverb depth on the fly.

6 CUSTOMIZABLE PRESETS
Save your favorite sounds and switch between them on the fly. Six slots, two banks, one tap to recall.

BUILT-IN TUNER
A full-featured tuner is built right in — no extra pedal, no extra cables, no compromise.

DYNAMIC LED FEEDBACK
Color-coded LEDs show mode, preset, looper status, and battery level at a glance.

BUILD IT. LAYER IT. JAM OVER IT.

The built-in 60-second looper turns Spark PEDAL into a writing, practice and performance tool. Lay down a base, stack overdubs, undo and redo with intuitive footswitch control.

• Record, overdub, play, stop, undo, and clear — all hands-free
• 60 seconds of loop time per layer
• Dedicated switches mean no menu hunting mid-loop

BUILT TO MOVE WITH YOU.

Rugged chassis, heavy-duty steel switches, and a footprint that fits any setup. Set it on your desk for a recording session, drop it on the floor for the gig, or slot it into your pedalboard at rehearsal. However you want to play, Spark PEDAL is ready.

Top Panel

• Center knob — Amp/FX mode selector
• Gain, Bass, Mid, Treble knobs
• 3 heavy-duty footswitches
• Dynamic LED indicators
• Built-in tuner

Back Panel

• ¼″ instrument input (electric, acoustic, or bass)
• Two ¼″ line outputs (L/Mono + R)
• ⅛″ stereo headphone output
• USB-C (charging, firmware updates, audio interface)
• ⅛″ MIDI in/out
• ¼″ TRS expression pedal input
• Bluetooth 5.0 + WiFi 2.4GHz

SPECS

Power

• Main Input Power: DC 5V/1A (USB)
• Battery Type: Built-in 3000mAh rechargeable lithium-ion battery
• Play Time: Up to 7 hours
• Charging Time: Approx. 4.5 hours

Controls & connectivity

Top Panel Controls & Displays

• 3 x Steel Footswitches for Preset Switching, Looper Control
• 4 x Knobs for Effects Control & Amp Tone Control
• 1 x Multifunction Control Knob for Amp Selection & Volume Control
• 6 x Footswitch Indicators (Multiple Color LEDs) for Preset & Looper Status
• 1 x Global Status Indicator (Multiple Color LED Ring)
• 1 x Power Indicator (To display battery level and charging status)
• 1 x Connection Indicator

Rear Panel Controls & I/o

• Power Button
• Pair Button
• 1 x 1/4" Input
• 2 x 1/4" Line Output
• 1 x 1/4" TRS Expression Pedal Input
• 1 x USB-C Port for Charging, Service, and Audio Interface
• 2 x 1/8" MIDI Input and Output Port
• 1 x 1/8" Headphone Output

Wireless Connectivity

• Bluetooth 5.0 for Bluetooth Audio and Wireless Connection with Companion App
• Wi-Fi (2.4GHz) for OTA (Over-the-Air) Firmware Update

Included in the box

• Spark PEDAL
• USB-C to USB-C Cable
• MIDI 3.5mm (1/8") to Standard DIN 5-pin Adapter x 2
• Quick Start Guide

Physical unit

• Dimensions
  
  • 175mm x 104mm x 47.2mm (Knob/Switch excluded) / 54.8mm (Knob/Switch included)
  • (6.89" x 4.1" x 1.86" / 2.16")
• Weight
  • 0.56 kg
  • 1.23 lb